I Memory Bank Selection - Icom ID-800H Instruction Manual

5
MEMORY OPERATION

I Memory bank selection

The ID-800H has a total of 10 banks (A to J). Each memory
channel, 1 to 500, may be assigned to one of the banks for
easy memory management.
q Push [M/CALL•PRIO] several times to select memory
mode, if desired.
w Push [BAND•MODE] to enter memory bank selection.
• Bank indicator blinks.
• When no memory bank is set, error beep sounds and the mem-
ory channel indicator nothing change. See the next page for
memory bank setting details.
[BAND•MODE]
e Rotate [DIAL] to select the desired bank, A to J.
• Banks that have no programmed contents are skipped.
r Push [BAND•MODE] to select the bank.
• Bank indicator stops blinking.
t Rotate [DIAL] to select the channel in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory mode, push [BAND• MODE]
twice.
37
Bank indicator blinks
z Push [MR/CALL] to select memory mode, if
BANK
desired.
x Push [FUNC] then [
memory bank selection.
• Bank indicator blinks.
• When no memory bank is set, error beep sounds
and the memory channel indicator nothing change.
[Y]/[Z]
See the next page for memory bank setting details.
c Push [Y Y ]/[Z Z ] to select the desired bank, A to J.
• Only programmed memory bank can be selected.
v Push [
A(MW)] to select the bank.
CLR
• Bank indicator stops blinking.
b Push [Y Y ]/[Z Z ] to select the channel in the bank.
• No channel numbers are displayed for memory
bank operation.
n To return to regular memory mode, push
[FUNC], [
MONI
[ A(MW)].
CLR
1(BANK)] to enter
MONI
1(BANK)] then push