Memory Bank Selection - Icom IC-V82 Instruction Manual

6
MEMORY/CALL OPERATION

■ Memory bank selection

The IC-V82/U82 has a total of 10 banks (A to J). Regular
memory channels, 0 to 199, are assigned into the desired
bank for easy memory management.
q Push [C•
] to select memory mode.
MR
C
Push
MR
w Push [A•
] and [#•
FUNC
lect memory bank condition.
• Bank initial blinks.
e Rotate [VOL] to select the desired
bank, A to J.
• Banks that have no programmed con-
tents are skipped.
r Push [✱•
] (or [D•
ENT
the bank.
• Initial stops blinking.
t Push [Y Y ] or [Z Z ] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory condition, push [A•
] to enter memory bank condition, then push
[#•
BANK
[✱• ] (or [D•
ENT
24
] to se-
BANK
]) to set
CLR
]).
CLR
■ Memory bank setting
q Push [C•
sired memory channel via [Y Y ] or [Z Z ].
C
Push
MR
w Push [A•
SET MODE
e Push [Y Y ] or [Z Z ] several times until
"bAk" appears.
[VOL]
• "– –" indication blinks as follows.
r Rotate [VOL] to select the desired
A
bank to be set.
FUNC
BANK
ENT
t Push [✱•
bank and return to regular memory condition.
y Repeat steps q to t to set another memory channel into
the same or another bank.
] and
FUNC
] to select memory mode, then select the de-
MR
] and [8• ] to enter
FUNC SET
.
] (or [D• ]) to set the channel into the
ENT CLR
[VOL]
A
FUNC
ENT
8
SET