Table of Contents
Advertisement
TRENDnet User's Guide
View List
System > SNMP > View List
1. Log into your switch management page (see
on page 9).
2. Click on System, click on SNMP, and click on View List.
3. Select Edit to edit the selected group name or Delete to delete it.
4. Click Add to add username to the user list.
5. Review the settings and click Apply,
View Name: Input the view name
•
Subtree OID: Input the OID to be used
•
•
Subtree Mask: Input the Subtree Mask
•
View Type: Select Included or Excluded from the drop down menu
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your switch management
page"
RMON
Statistics
System > RMON > Stat List
You can remotely view individual port statistics with RMON by using your SNMP NMS
software and the RMON portion of the MIB tree.
1. Log into your switch management page (see
on page 9).
2. Click on System, click on RMON, and click on Stat List.
3. Click Add to add the entry to the table
4. Review the settings and click Apply.
•
Index: This parameter specifies the ID number of the new group. The range is 1
to 65535.
•
Data Source: This parameter specifies the port where you want to monitor the
statistical information of the Ethernet traffic.
•
Owner: This parameter is used to identify the person who created an entry. It is
primarily intended for switches that are managed by more than one person,
and is an optional field.
In the list, you can click Delete to delete the entry.
TL2-F7120
"Access your switch management
page"
25
Advertisement
Table of Contents
