Provision Network Management Settings
INTRODUCTION
This procedure provides step-by-step instructions to provision the Network Management
settings for the MX2820 System Controller Unit (SCU). The Network Management settings
include:
• Internet Protocol (IP) network settings (Ethernet Interface)
• Network Service ports
• Trivial File Transfer Protocol (TFTP) server
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before provisioning the Network Management settings.
PROCEDURE
1. If not already connected, connect VT100 terminal or PC to the craft port. For details, refer
to DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. Provision IP network settings.
61186003L1-1D
DLP-718
7-89