Chapter 1. Introduction
Control Port Input
Features of the control port input include:
•
EIA-232 input from a personal computer (PC) or a modem for control of the TSU LT
•
Chain input from another TSU LT
•
Up to 9600 baud operation
•
Input for PC proxy agent control or for a chained connection
Chain Port Output
Features of the chain port output include:
•
EIA-232 output to chain control to other TSU LTs
•
Up to 9600 baud operation
•
Automatic setup; no user input required
Software Management
Front Panel
The front panel provides complete and easy control of all items that can be configured through menu-
guided options. The front panel LCD also displays the status of operation and performance reports for the
unit. A complete discussion of the operation of the front panel is found in Chapter 3. The menu options are
found in Chapters 4 through 7.
T-Watch Pro Management Software Program
T-Watch Pro is the ADTRAN management software program that allows the user to control the TSU LT
from a PC. It provides complete control over the configuration of the TSU LT using a graphic interface.
The T-Watch Pro program displays the same status and performance data as the front panel LCD. This
data is displayed as tables and graphs.
The T-Watch Pro program has the following capabilities:
•
A modem interface permits dialing into a remote TSU LT location to configure the unit, read the unit's
status, or check its performance.
•
The performance data read from the units can be exported to a file which is compatible with common
spread sheet programs.
Testing
The TSU LT offers three forms of testing:
•
Self-test
•
Loopback tests
•
Pattern generation and check
26
© 2002 ADTRAN, Inc.
TSU LT User Manual
61202060L4-1