Figure 7-28. Ds3/Ds2 Network Provisioning Menu - ADTRAN MX2820 System Manual

MX2820 System Manual
6. From the Access Modules Provisioning menu, select
Figure 7-28 shows the DS3/DS2 Network Provisioning Menu.
Shelf: 1
Unacknowledged Alarms:
Selection:

Figure 7-28. DS3/DS2 Network Provisioning Menu

7. From the Network Provisioning menu, select
8. Input a value to set the DS3 framing format to match the format of the receive signal at
the network interface, and press
• Select 1 for C-BIT framing.
• Select 2 for M13 framing.
9. From the Network Provisioning menu, select
10. Input a value to set the desired DS3 timing and press
• Select 1 for Loop timing if the M13 MUX connects to a network that provides timing.
• Select 2 for Local timing if the M13 MUX provides the master timing source for the
circuit.
11. From the Network Provisioning menu, select option 3,
.
E
NTER
12. Input a value from 1 to 4, and press
• Select 1,
D
ISABLE
MUX still responds to individual T1 in-band CSU/NIU loopbacks if configured with the
T1/E1 Loopback Detection menu.
• Select 2,
FEAC/C-BIT
received over either the DS3 Far End Alarm and Control (FEAC) channel and/or DS2-
level C-bits. This mode is valid for both C-BIT and M13 framing formats.
7-114
Slot: 1A ADTRAN MX2820 System
MAJOR
Network Provisioning
1 - DS3 Framing
2 - DS3 Timing
3 - DS3 Remote Loopbacks
4 - DS3 XCV Threshold
5 - IP Forwarding Protocol: ADTRAN
6 - IP Forwarding MTU
7 - DS2 #1 Mode
8 - DS2 #2 Mode
9 - DS2 #3 Mode
10 - DS2 #4 Mode
11 - DS2 #5 Mode
12 - DS2 #6 Mode
13 - DS2 #7 Mode
14 - DS3 Equipment Identification
E
NTER
, to ignore all out-of-band requests (FEAC and DS2 C-BIT). The M13
, to allow the M13 MUX to respond to remote loopback requests
N
ETWORK
TID:
: C-BIT
: Local
: FEAC/C-BIT
: Disabled
: 260 (PREFERRED)
: M12 <4xT1>
: M12 <4xT1>
: M12 <4xT1>
: M12 <4xT1>
: M12 <4xT1>
: M12 <4xT1>
: M12 <4xT1>
'?' - System Help Screen
DS3 F
RAMING
.
and press
DS3 T
IMING
E
NTER
DS3 R
.
E
NTER
and press
I
NTERFACE
07/26/04 16:57
HTVLALEXD16
and press .
E
NTER
.
E
NTER
.
, and press
L
EMOTE OOPBACKS
.
E
NTER
61186003L1-1D