Provision Sts-1 Network; Sts-1 Provisioning Data; Introduction; Prerequisite Procedures - ADTRAN MX2820 System Manual

Provision STS-1 Network

INTRODUCTION

This procedure provides step-by-step instructions to provision the STS-1 MUX for the
MX2820 system.

PREREQUISITE PROCEDURES

Obtain all necessary local instructions before provisioning the STS-1 MUX. The parameters
need to be set to match the desired application.

STS-1 PROVISIONING DATA

Provisioning data includes the following:
• STS-1 timing
• STS-1 VT Mode
• STS-1 J1 Path Trace
In the case of 1:1 protection, provisioning the Active STS-1 MUX
module automatically provisions the Standby STS-1 MUX module.

PROCEDURE

1. If not already connected, connect the VT100 terminal or PC to the craft port. For details,
refer to DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
4. From the Access Module Menus, select the slot number for the STS-1 MUX module that is
to be provisioned, and press
61186003L1-1D
DLP-741
NOTE
A M
CCESS ODULES
.
E
NTER
and press .
E
NTER
7-159