Figure 7-18. Ethernet Interface Menu - ADTRAN MX2820 System Manual

MX2820 System Manual
d. From the Network Management menu, select
Figure 7-18 shows the Ethernet Interface menu.
Shelf: 1
Unacknowledged Alarms:
Selection :
e. From the Ethernet Interface menu, select IP Address, and press
f. Input the IP address, and press
g. From the Ethernet Interface menu, select Subnet Mask, and press
h. Input the Subnet Mask, and press
i. From the Ethernet Interface menu, select Gateway, and press
j. Input the Gateway address, and press
k. From the Ethernet Interface menu, select Ethernet Data Rate, and press
l. From the Ethernet Data Rate menu, select one of the following data rates then press
:
E
NTER
• 1 for AUTO
• 2 for 10 Mbps
• 3 for 100 Mbps
m.From the Ethernet Interface menu, select
.
E
NTER
n. From the Interface Ethernet Link MAC Address menu, select one of the following
options, and press
• 1 to Enable
7-92
ADTRAN MX2820 System
Ethernet Interface
1 - IP Address
2 - Subnet Mask
3 - Gateway
Ethernet Data Rate : 10 Mbps
4 - Interface
Ethernet Link
MAC Address

Figure 7-18. Ethernet Interface Menu

.
E
NTER
E
NTER
E
:
E
NTER
E I
THERNET NTERFACE
TID:
: 10.200.3.32
: 255.255.0.0
: 10.200.254.254
: ENABLE
: Up
: 00:a0:c8:05:03:0a
'?' - System Help Screen
.
.
NTER
I E L
NTERFACE THERNET
and press .
E
NTER
04/26/04 13:44
HTVLALEXD16
.
E
NTER
.
E
NTER
.
E
NTER
.
E
NTER
, and press
MAC A
INK DDRESS
61186003L1-1D