MX2820 System Manual
Determine the Cause of the Alarm
Utilizing the information from the LEDs and Alarm Log, use the following subsections to
further define the nature of the alarm.
SCU ALARM SUMMARY - 1186003LX, 1186003LX
Table 8-3
provides the MX2820 SCU alarm summary.
Alarm
Description
Card Removed
This alarm is set when a module is physically removed
from a slot in the shelf. Inserting a module into the slot
clears the alarm.
AUX1
This alarm is user-definable. The severity level and the
description string are also user-definable.
Access Identifier (AID) Index and TL1 condition codes are
user-definable.
AUX2
This alarm is user-definable. The severity level and the
description string are also user-definable.
AID Index and TL1 condition codes are user-definable.
AUX3A
This alarm is user-definable. The severity level and the
description string are also user-definable.
AID Index and TL1 condition codes are user-definable.
NOTE: AUX3A and AUX3B can be used to support the
Fan Module alarms.
AUX3B
This alarm is user-definable. The severity level and the
description string are also user-definable.
AID Index and TL1 condition codes are user-definable.
This alarm is generated when the SCU receives a
cadenced alarm signal on the AUX3 wire-wrap post.
NOTE: AUX3A and AUX3B can be used to support the
Fan Module alarms.
8-8
Table 8-3. SCU Alarm Summary
Severity Level
User-definable
User-definable
User-definable
User-definable
User-definable
61186003L1-1D