INTRODUCTION
This procedure provides step-by-step instructions to change the password for the logged-in
user.
It is recommended that the system or network administrator per-
form the steps in this procedure. The personnel using this proce-
dure must logon to the MX2820 system with the ADMIN account.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before changing the password.
PROCEDURE
1. If not already connected, connect VT100 terminal or PC to the craft port. For details, refer
to DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
4. From the System Controller menu, select
61186003L1-1D
DLP-736
Change Password
NOTE
S
YSTEM
, and press
C
ONTROLLER
.
P
ROVISIONING
.
E
NTER
7-141