Trap Ip Addresses; Read Community Name; Write Community Name; System Name - ADTRAN MX2820 System Manual

Trap IP Addresses

Enter up to four IP addresses of SNMP managers to which the MX2820 sends traps.

Read Community Name

This field is used to enter the authentication strings used for SNMP management. Match the
MX2820 to the SNMP manager for read privileges.

Write Community Name

This field is used to enter the authentication strings used for SNMP management. Match the
MX2820 to the SNMP manager for write privileges.

System Name

This value is equivalent to the sysName item defined in RFC1213. The value is an administra-
tively assigned name for the managed node. By convention, this is the node's fully-qualified
domain name.
The term SNMP broadly refers to the message protocols used to exchange information between
the network management system (NMS) and the managed devices, as well as to the structure
of device management databases. SNMP has three basic components:
• the network manager
• the agent
• the MIB

Network Manager

The network manager is a set of control programs that collect, control, and present data
pertinent to the operation of the network devices. These programs reside on a network
management station.

Agent

The agent is a control program that resides in every network device. This program responds to
queries and commands from the network manager, returns requested information or invokes
configuration changes initiated by the manager, and sends unsolicited traps to the manager.

MIB

An MIB is an industry standard presentation of all status and configuration parameters
supported by a network device.
MIB files are available from ADTRAN. Refer to
Warranty"
61186003L1-1D
NOTE
for the Tech. Support contact.
Section 5, User Interface Guide - UIG-540, SCU Utilities
"Appendix B,
5-133