Figure 5-95. Snmp Provisioning Screen; Provisioning Simple Network Management Protocol - ADTRAN MX2820 System Manual

MX2820 System Manual

PROVISIONING SIMPLE NETWORK MANAGEMENT PROTOCOL

The embedded SNMP feature of the MX2820 allows the unit to be accessed and controlled by a
network manager through the 10/100Base-T local area network (LAN) port.
To provision SNMP options for the MX2820 SCU, perform the following steps:
1. Select
S C
YSTEM ONTROLLER
2. Select
P
ROVISIONING
3. Select from the Provisioning menu.
SNMP
Figure 5-75 provides an illustration of the Restore Default Provisioning screen.
Shelf: 1
Unacknowledged Alarms: CRITICAL
1 - Trap Host 1 IP
2 - Trap Host 2 IP
3 - Trap Host 3 IP
4 - Trap Host 4 IP
5 - ifIndex
6 - SCU Traps
7 - System Name
8 - System Location : SysLocation not set
9 - System Contact
10 - Read Community
11 - Write Community : private
Selection :
The options include configuring up to four SNMP Trap Hosts, selecting the ifIndex method,
enabling/disabling SCU traps, and setting the System Name, System Location, System
Contact, Read Community, and Write Community.
5-132
from the MX2820 Main Menu.
from the System Controller Menu
ADTRAN MX2820 System
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
Method : Fixed (slot-based)
: ENABLE
:
: www.adtran.com
: public

Figure 5-95. SNMP Provisioning Screen

.
TID:
SNMP
'?' - System Help Screen
07/15/04 10:43
61186003L1-1D