Procedure; Follow-Up Procedures - ADTRAN MX2820 System Manual

MX2820 System Manual
Electronic modules can be damaged by static electrical discharge.
Before handling modules, wear an antistatic discharge wrist strap
to prevent damage to electronic components. Place modules in
antistatic packing material when transporting or storing. When
working on modules, always place them on an approved antistatic
mat that is electrically grounded.

PROCEDURE

1. Plug the male RJ-45 modular connector into the female RJ-45 port on the MX2820 back-
plane.
2. Route the cable to the Ethernet Local Area Network (LAN) connector. Allow enough cable
for routing the cable to the right from the backplane connector to the frame, and for neat
tie-off appearance in accordance with Central Office (CO) Standard Operating Procedures
(SOP).

FOLLOW-UP PROCEDURES

Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
7-66
CAUTION
61186003L1-1D