Follow-Up Procedures - ADTRAN MX2820 System Manual

MX2820 System Manual
To select ALL of a particular module type, after entering the slot/
position of the first, press A (all) then press
Modules selected for upgrade will be highlighted in reverse video.
10. Press then
U E
NTER
modules. The screen will indicate that the software is
screen will indicate Done.
11. Reset the module, if necessary.
Many modules will automatically restart their code without taking down the data
interface. In this case, the module display will disappear momentarily and then restore,
indicating the new code revision.
In other cases, the Done indication will remain and a reset of the module is necessary
from that modules Provisioning menu to initialize the new code.

FOLLOW-UP PROCEDURES

Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
7-60
to initiate the transfer of the code image to each of the selected
NOTE
.
E
NTER
"writing."
When complete, the
61186003L1-1D