Procedure - ADTRAN MX2820 System Manual

MX2820 System Manual

PROCEDURE

Perform the Steps Below in the Order Listed:
1. Install Modules in MX2820 Shelf:
• Unpack, inspect, and install the primary M13 MUX Module.
• Unpack, inspect, and install the protect M13 MUX Module, if required.
• Install front panel blanks in vacant slots.
2. Provision the DS3/DS2 network.
3. Provision the DSX-1 (T1/E1) interface.
4. Provision M13 MUX protection.
5. Provision M13 MUX loopback timeout.
6. Perform acceptance testing for M13 MUX Modules.
FOLLOW-UP PROCEDURES
All applicable modules, including SCU and the required M13 MUX modules, have been
installed. Follow-up procedures should be observed in accordance with CO SOP.
If STS-1 MUX modules are to be deployed, refer to "NTP-003,
6-8
For details, refer to:
DLP-505
DLP-730
DLP-737
DLP-738
DLP-739
DLP-602
Clock Module Installation".
61186003L1-1D