Table 5-30. Ds3 Pm Near-End Parameter Descriptions; Ds3 Pm Near-End Parameter Descriptions - ADTRAN MX2820 System Manual

DS3 PM Near-End Parameter Descriptions

Table 5-30 provides DS3 PM near-end parameter descriptions.

Table 5-30. DS3 PM Near-End Parameter Descriptions

DS3 PM Parameter
Line
CV-L
ES-L
SES-L
LOSS-L
Path
CVP-P
ESP-P
SESP-P
UASP-P
CVCP-P
ESCP-P
61186003L1-1D
Definition
Code Violation -
Line
Errored Second -
Line
Severely Errored
Second - Line
Loss of Signal Sec-
ond - Line
Code Violation, P-
Bit Parity - Path
Errored Second, P-
Bit Parity- Path
Severely Errored
Second, P-Bit Par-
ity - Path
Unavailable Sec-
ond,
P-Bit Parity - Path
Code Violation, CP-
Bit Parity - Path
Errored Second,
CP-Bit Parity - Path
Section 5, User Interface Guide - UIG-520, M13 MUX PM Statistics
Description
This parameter indicates the number of Bipolar Viola-
tions (BPVs) and Excessive Zeros (EXZs) that have
occurred.
This parameter indicates the number of seconds in
which one or more Coding Violations (CVs) or one or
more Loss-of-Signal (LOS) defects occurred.
This parameter indicates the number of seconds with 45
or more BPVs and EXZs, or one or more LOS defects.
This parameter indicates the number of seconds for
which one or more LOS defects occurred.
This parameter indicates the number of P-Bit parity
errors that have occurred. This count is not incremented
when UAS are counted.
This parameter indicates the number of seconds with
one or more P-Bit parity errors, one or more SEF defects,
or one or more Alarm Indication Signal (AIS) defects.
This count is not incremented when Unavailable Sec-
onds (UAS) are counted.
This parameter indicates the number of seconds with 45
or more P-Bit parity errors, one or more SEF defects, or
one or more AIS defects. This count is not incremented
when UAS are counted.
This parameter indicates the number of seconds that the
DS3 path is unavailable. UASP-P accumulates at the
onset of 10 contiguous SESP-Ps and stop accumulating
at the onset of 10 contiguous seconds without SESP-Ps.
This parameter indicates the number of CP-Bit parity
errors that have occurred. This count is not incremented
when UAS are counted.
This parameter indicates the number of seconds with
one or more CP-Bit parity errors, one or more SEF
defects, or one or more AIS defects. This count is not
incremented when UAS are counted.
5-43