Enable or Disable Smart Start
INTRODUCTION
This procedure provides step-by-step instructions to enable or disable the Smart Start feature
for the MX2820 System Controller Unit (SCU). The Smart Start feature allows an SCU to be
replaced and have the new SCU operate with the same settings as the SCU being replaced.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before enabling or disabling the Smart Start feature.
PROCEDURE
1. If not already connected, connect VT100 terminal or PC to craft port. For details, refer to
DLP-715
2. Logon to the MX2820 system. For details, refer to
61186003L1-1D
DLP-729
DLP-716
7-107