Figure 7-52. Access Module Main Menu; Figure 7-53. Access Module Provisioning Menu - ADTRAN MX2820 System Manual

4. From the Access Module Menus screen, select the slot number for the M13 MUX module
that is to be provisioned, and press
Figure 7-52 shows the Main Menu screen for the access module.
Shelf: 1
Unacknowledged Alarms: None
Selection:
5. From the Main Menu screen, select
Figure 7-53 shows the Provisioning menu.
Shelf: 1
Unacknowledged Alarms: None
Selection:
61186003L1-1D
Section 7, User Interface Guide - DLP-737, Provision DSX-1 (T1/E1) Interface
E
Slot: 1A ADTRAN MX2820 System
Main Menu
1 - Configuration
2 - Provisioning
3 - Status
4 - Test
5 - Performance Monitoring

Figure 7-52. Access Module Main Menu

P
Slot: 1A ADTRAN MX2820 System
Provisioning
1 - Network Interface
2 - T1/E1 Interfaces
3 - Service States
4 - Protection
5 - Save Provisioning
6 - Restore Factory Defaults
7 - Card Reset
8 - Auto Save
9 - Loopback Timeout :
10 - Card Pair ID

Figure 7-53. Access Module Provisioning Menu

.
NTER
TID:
'?' - System Help Screen
.
ROVISIONING
TID:
: Enabled
60 minutes
: MX2820 M13
'?' - System Help Screen
04/26/04 16:25
HTVLALEXD16
04/26/04 16:26
HTVLALEXD16
7-147