Figure 7-54. T1/E1 Provisioning Menu - ADTRAN MX2820 System Manual

MX2820 System Manual
6. From the Provisioning menu, select
Figure 7-54 shows the T1/E1 Provisioning menu.
Shelf: 1
Unacknowledged Alarms: None
Selection:
7. From the T1/E1 Provisioning menu, select
Options for a T1/E1 line are as follows:
• 1 - Disables T1/E1 lines
• 2 - Enables T1/E1 lines
• 3 - Auto Enables T1/E1 lines. The M13 MUX unit automatically detects when a T1/E1
is connected
8. From the T1/E1 Provisioning menu, select
This parameter sets the line code for each individual T1/E1 interface to match the
connected device. Options for a T1/E1 line are as follows:
• 1 - AMI
• 2 - B8ZS
• 2 - HDB3 (for an E1 line)
9. From the T1/E1 Provisioning menu, select
7-148
T1/E1 I
Slot: 1A ADTRAN MX2820 System
T1/E1 Provisioning
1 - T1/E1 State
2 - T1/E1 Line Coding
3 - T1/E1 Line Length
4 - T1/E1 Loopback Detection
5 - T1/E1 Circuit Protection
6 - T1/E1 Line Identification
7 - T1/E1 XCV Threshold

Figure 7-54. T1/E1 Provisioning Menu

and enables the T1/E1 line.
.
NTERFACE
TID:
: Disabled
'?' - System Help Screen
.
T1/E1 S
TATE
.
T1/E1 L C
INE ODING
.
T1/E1 L L
INE ENGTH
04/26/04 16:32
HTVLALEXD16
61186003L1-1D