Figure 7-26. Access Modules Main Menu; Figure 7-27. Access Module Provisioning Menu - ADTRAN MX2820 System Manual

4. From the Access Module Menus, select the slot number for the M13 MUX module that is
to be provisioned, and press
Figure 7-26 shows the Access Modules Main Menu screen.
Shelf: 1
Unacknowledged Alarms: None
Selection:
5. From the Access Module Main Menu, select
Figure 7-27 shows the Access Modules Provisioning menu.
Shelf: 1
Unacknowledged Alarms: None
Selection:
61186003L1-1D
.
E
NTER
ADTRAN MX2820 System
Main Menu
1 - Configuration
2 - Provisioning
3 - Status
4 - Test
5 - Performance Monitoring

Figure 7-26. Access Modules Main Menu

Slot: 1A ADTRAN MX2820 System
Provisioning
1 - Network Interface
2 - T1/E1 Interfaces
3 - Service States
4 - Protection
5 - Save Provisioning
6 - Restore Factory Defaults
7 - Card Reset
8 - Auto Save
9 - Loopback Timeout :
10 - Card Pair ID

Figure 7-27. Access Module Provisioning Menu

Section 7, User Interface Guide - DLP-730, Provision DS3/DS2 Network
'?' - System Help Screen
and press
P
ROVISIONING
TID:
: Enabled
60 minutes
: MX2820 M13
'?' - System Help Screen
05/04/04 09:29
TID: HTVLALEXD16
.
E
NTER
04/26/04 16:26
HTVLALEXD16
7-113