Figure 5-90. Sca Restore Provisioning Options Screen; Autosave Retries; Sca Restore Provisioning Screen; Pair - ADTRAN MX2820 System Manual

MX2820 System Manual

AutoSave Retries

This field specifies how many times the AutoSave system should attempt to re-send the SCA
file to the TFTP server in the event of TFTP errors before giving up.

SCA Restore Provisioning Screen

This screen is used to display and configure provisions related to SCA restore of access and
MUX module provisions. See
Shelf: 1
Unacknowledged Alarms: CRITICAL
8 - Restore Provisions To SCU
9 - Restore Provisions To Modules
Selection :
Normal = Restorable,
(E)nable ALL, (D)isable ALL, (T)oggle ALL

Figure 5-90. SCA Restore Provisioning Options Screen

Pair

This column represents each of the MX2820 module slots 1 through 9 (23-inch chassis) or 1
through 7 (19-inch chassis) and Clock Module C. Provisioning will be restored to the active
module, which will then restore the standby module (if equipped).

CardType

These columns represent the card type identification of the module currently installed in the
corresponding slot of the MX2820.

Restore

These columns represent whether or not SCA restore to the corresponding slot has been
enabled by the administrator. If the field is displayed in inverse video, some condition (such as
an empty slot, user disable, or exclusion due to the card being In-Service) exists that prevents
SCA restore to this slot.
5-124
Figure 5-90 for the SCA Module Restore Provisioning Screen.
ADTRAN MX2820 System
SCA Restore Provisioning Options
Pair CardType Restore
C. ............ Yes
1. ............ Yes
2. MX2820 M13.. Yes
3. ............ Yes
4. ............ Yes
5. MX2820 STS1. Yes
6. ............ Yes
7. ............ Yes
: ENABLE
: ENABLE
Inverse = NOT restorable
10/10/00 00:15
TID:
- = No Prov-Info
x = Unsupported
............ = Empty Slot
'?' - System Help Screen
61186003L1-1D