Figure 5-42. Vt/Port Statistics Menu; Viewing Vt/Port Statistics - ADTRAN MX2820 System Manual

VIEWING VT/PORT STATISTICS

To access the VT/Port Statistics menu, select the options from each screen listed and then
press .
E
NTER
1. Select
A M
CCESS ODULES
2. Select a number from
Access Module Menus.
3. Select
P
ERFORMANCE
4. Select from the Performance Monitoring menu.
VT/P
ORT
Figure 5-42 shows an example of the VT/Port Statistics menu screen.
Shelf: 1
Unacknowledged Alarms: None
Selection:
From the
VT/P S
ORT TATISTICS
threshold levels, and enable or disable alarms. Refer to the applicable subsection for
additional information.
61186003L1-1D
from the MX2820 Main Menu.
to for a 19-inch shelf, or
1 7
from the STS-1 Main Menu.
M
ONITORING
Slot: 4A ADTRAN MX2820 System
VT/Port Statistics
1 - Near End Daily
2 - Near End Quarter Hourly
3 - Far End Daily
4 - Far End Quarter Hourly
5 - Near End Daily Thresholds
6 - Near End Quarter Hourly Thresholds
7 - Far End Daily Thresholds
8 - Far End Quarter Hourly Thresholds

Figure 5-42. VT/Port Statistics Menu

menu screen, options can be selected to view PM data, set
Section 5, User Interface Guide - UIG-525, STS-1 MUX PM Statistics
to for a 23-inch shelf, from the
1 9
TID:
'?' - System Help Screen
04/16/04 09:18
HTVLALEXD16
5-75