Provision Snmp Management Options; Introduction; Prerequisite Procedures; Procedure - ADTRAN MX2820 System Manual

Provision SNMP Management Options

INTRODUCTION

This procedure provides step-by-step instructions to set the Simple Network Management
Protocol (SNMP) management options for the MX2820 System Controller Unit (SCU).

PREREQUISITE PROCEDURES

Obtain all necessary local instructions before setting the SNMP management options.

PROCEDURE

1. If not already connected, connect VT100 terminal or PC to craft port. For details, refer to
DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
61186003L1-1D
DLP-732
7-123