Emc (Iec 61800-3) - Danfoss iC7-60EA3N05-206A Operating Manual

iC7-Automation Air-cooled Enclosed Drives
Operating Guide
Item
Storage/transportation tempera-
ture
Relative humidity
Environmental conditions storage
Environmental conditions trans-
portation
Environmental conditions opera-
tion
Pollution degree
Altitude
Vibration (IEC60068-2-6)
Shock (IEC60068-2-27)
Sound pressure level
On board level on coated boards.
1

10.8.4 EMC (IEC 61800-3)

Table 53: EMC Data
Item Technical data
Immunity Fulfills EN 61800-3, 1
Emissions
380–500 V AC: EN 61800-3 (2004), category C3, if the drive is installed according to instructions.
All: The drive can be changed to C4 for IT type mains.
Danfoss A/S © 2023.09
Technical data
–40 °C...+70 °C (-40 °F...158 °F)
5...95% RH, no condensation, no dripping water
(IEC 60721-3-1)
Climatic conditions: Class 1K5
Chemically active substances: Class 1C2
Biological conditions: Class 1B1
Mechanical conditions: Class 1M3
Mechanically active substances: Class 1S3
(IEC 60721-3-2)
Climatic conditions: Class 2K4
Chemically active substances: Class 2C2
Biological conditions: Class 2B1
Mechanical conditions: Class 2M2
Mechanically active substances: Class 2S2
(IEC 60721-3-3)
Climatic conditions: Class 3K5
Chemically active substances: IEC 60721-3-3 Edition 3.0/ISO 3223 Second Edition, class C4
(1)
Biological conditions: Class 3B1
Mechanical conditions: Class 3M3
Mechanically active substances: Class 3S3
Special climatic conditions (heat radiation): Class 3Z1
PD2
0...4000 m (0...13100 ft) above sea level: in case network is not corner-grounded (Voltage
class 5)
Above 1000 m (3300 ft): derating of maximum ambient operating temperature by 1 °C per
each 100 m is required.
Displacement amplitude 0.5 mm (peak) at 5...22 Hz)
Maximum acceleration amplitude 1 G at 22...150 Hz
max 4 G, 11 ms (in package)
–
st nd
and 2 environment
Specifications
AQ330347384398en-000201 / 139Z8096 | 109