Danfoss iC7 Series Design Manual page 7

Design Guide | iC7 Series Liquid-cooled System Modules
8.9.6 Analog Reference Voltage Output
8.9.7 24 V DC Voltage Output
8.9.8 Thermistor Input
8.10 Assembling the Control Unit Mounting Plates
8.11 Attaching the Control Unit Mounting Plates
8.12 Installing the Control Unit
8.13 Installing Boards to the Modular Control Unit
8.14 Connecting the Fieldbus Cable and the Fiber Cables
8.15 Installing the Control Cables into the Control Terminals
8.16 Connecting the Control Panel
8.17 Fiber Cable Requirements
Maintenance
9
9.1 Preventive Maintenance Recommendations
9.2 Maintenance Log for Cooling System
9.3 Using the Product Modified Label
9.4 Replacing the RTC Battery
9.5 Removing the System Module from the Integration Unit
9.6 Installing the System Module in the Integration Unit
9.7 Draining the System Modules
9.7.1 Draining the System Modules, System Modules with Integration Units, and Filters
9.7.2 Draining the Power Units for xR10L and xR12L
Specifications
10
10.1 Tightening Torques
10.2 Dimensions
10.2.1 Dimensions of the Inverter Module, IM10L, AFE/GC Module, AM10L, and DC/DC Converter Module, DM10L
10.2.2 Dimensions of the Inverter Module, IR10L
10.2.3 Dimensions of the Active Front-end Module/Grid Converter, AR10L
10.2.4 Dimensions of the DC/DC Converter, DR10L
10.2.5 Dimensions of the Inverter Module, IM12L, AFE/GC Module, AM12L, and DC/DC Converter Module, DM12L
10.2.6 Dimensions of the Inverter Module, IR12L
10.2.7 Dimensions of Active Front-end Module/Grid Converter, AR12L
10.2.8 Dimensions of the DC/DC Converter, DR12L
10.2.9 Dimensions of the LC filter for AM10L
Danfoss Drives Oy © 2024.03 AJ475942178716en-000101 / 172K2848A |
107
107
107
107
108
109
109
110
111
112
112
113
116
116
117
118
121
123
123
124
126
127
127
128
129
130
131
132
133
134
135
7