Mounting And Beam Alignment; Mounted With Top/Bottom Adjustable Brackets (F39-Lgtb) And Standard Adjustable Brackets (F39-Lga) - Omron F3SG-4RA****-25-01TS Series Quick Installation Manual

Setting with DIP Switch

6. Mounting and Beam Alignment

6-1. Mounted with Top/Bottom Adjustable Brackets (F39-LGTB) and Stan-
Step1
dard Adjustable Brackets (F39-LGA)
■
Check
Dimensions (F3SG-RA Series Except F3SG-4RA0185-25-01TS)
position
[Backside mounting]
2-S3
Step2
Top/Bottom
Mount
Adjustable Bracket
(F39-LGTB)
Step3
Backside : 2-S3
Align
beams
13.6
Standard Adjustable
Bracket (F39-LGA)
Top/Bottom
Adjustable Bracket
(F39-LGTB)
F3SG-4RA-25-01TS Series (Except for 0185)
Dimension A
Dimension C
Dimension D
Dimension G
Dimension H
Dimension I
Dimension P
* N1 can adjust from 0 mm to 30 mm. N2 can adjust from 0 mm to 12 mm.
Protective height
(C3)
0265 to 1065
1145 to 1945
*1. The number of brackets required to mount either one of emitter and receiver.
*2. The Top/Bottom Adjustable Bracket is not useable together with the Standard Fixed Bracket. When it is necessary to use it with
another bracket, only the combination with the Standard Adjustable Bracket is possible.
Refer to User's Manual for dimensions of side mounting.
5
Wiring
48.6
4
4
35
S2.5
24.85
Optional accessory not
connected
C+23
4-digit number of the type
name (Protective height)
C-45
C+N1+N2+66.5
C+N1+N2+92
C+N1+N2+111
20
Number of Top/Bottom
Adjustable Brackets*1 Adjustable Brackets *1 *2
2
2
Mounting/Beam Alignment
35
26.5
23.2
2-M5 or M6
40.8
35
2-M5 or M6
9.2
<Screw for Top/Bottom Adjustable
Bracket: M5 or M6>
Optional accessory connected
F39-JGR2WTS
Same as on the left
Same as on the left
Same as on the left
C+N2+73.5
C+N2+99 C+N2+109.5
C+N2+118 C+N2+128.5
Same as on the left
Number of Standard
Dimension F
0
1 1000 mm max.
Operation check
2-M8
2-M5 or M6
24.85
24.85
<Screw for Top/Bottom Adjustable
Bracket: M8>
[ Unit : mm ]
F39-LP
F39-BT
F39-BTLP
C+N2+84 C+N2+95.5
C+N2+121
C+N1+N2+140
-
F3SG-4RA-25-01TS
Quick Installation Manual