Pair Connection; I/O Pair-Connection Settings - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules
4.7

Pair Connection

On the Pair page, within the Pair Connection Settings section, users can enable and configure the
I/O pair-connection function of the module using Modbus TCP. This allows for the establishment of
logic connections between Local and remote I/O, as explained below.
4.7.1

I/O Pair-Connection Settings

Note: The configuration page varies based on the I/O type.
E.g., ET-2217CI
The analog input (AI) modules only support the Push mode (Local AI to Remote AO).
E.g., ET-2224/28
The analog output (AO) modules only support the Pull mode (Remote AI to Local AO).
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -60 -