ICPDAS ET-2268 CR User Manual page 104

ET-2200 Series Ethernet I/O Modules
The table describes the parameters contained in the " Analog Output " section.
Item
Analog Output
Each AO channel has a specific Trap. Check the box to enable the Trap function
AO 7-0
for that AO channel. "Specific ID" is the ID number set for individual channel
Update Setting After changing and saving the settings, also reboot the module to take effect
Reboot Click the button to reboot the module
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Description
-104 -