ICPDAS ET-2268 CR User Manual page 174

ET-2200 Series Ethernet I/O Modules
Step 4: Make sure the IP address and MAC address are correct. Click on the OK button.
Step 5: The progress 0% will be displayed in a command prompt window. Follow the steps.
Method 1 - Local Update:
Set the Init/Run switch to the "Init" position and reboot the module to start the update.
Method 2 - Remote Update:
Click the Web button and log into the web page of the module, and then click the Update button on
the Network page to start the update.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -174 -