Ao - Calibration - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.4.8 AO - Calibration

The following table provides parameter notes for the Calibration section:
Item
Calibration
Now Mode
Change Mode
Channel
Set Output
Set Calibration
Step1: In the Analog Output Configuration section of the I/O Settings page, Select the Type and
Modbus Format, then click the Update Settings button to save the changes.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Used to display the current mode
Click the Calibration Mode (or Run Mode) button to change the mode
Choose the AO channel for calibration
Enter the voltage/current output value
Click the Calibration Apply button to perform calibration
Description
-54 -