ICPDAS ET-2268 CR User Manual page 52

ET-2200 Series Ethernet I/O Modules
The table describes the parameters contained in the "Data Logger" section.
Item
Status
Change Logging
Overwrite on Full
Sampling Interval -
Second
Sampling Interval -
Millisecond
Period Start-
Year, Month, Date, Hour,
Minute, Second
Period End-
Year, Month, Date, Hour,
Minute, Second
 Reset data logger to empty
Click the "Reset Data Logger" button to remove data.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Display the current status of data logging.
Set the status of data logging. It can be set to Stop, Run, Period,
Pause, and Continue.
Whether to overwrite data
The time interval for logging
The time interval for logging data. (Range: 0-1000, in 5 ms step)
The start time for logging data.
(Year/Month/Date/Hour/Minute/
The end time for logging data.
(Year/Month/Date/Hour/Minute/
Description
when it is full. It can be set to
data. (Range: 0-65535, Unit: second)
Second).
Second).
Yes or No.
-52 -