Table of Contents
Advertisement
ET-2200 Series Ethernet I/O Modules
4.3
Network
The Network page provides four sections, each of which will be described in more detail below.
1. IP Address:
It can be used to configure the Ethernet settings for ET-2200, e.g., the IPv4 address, the IPv6
address, DNS settings, and Modbus TCP Slave settings.
2. General Settings:
It can be used to configure the Ethernet speed, system timeout, TCP timeout, UDP heartbeat
settings, and web auto-logout for ET-2200.
3. Other Operations:
It can be used to reset the ET-2200 to factory defaults or reboot, or remotely upgrade its
firmware.
4.3.1
IP Address Configuration
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
-36 -
Advertisement
Table of Contents
