Wiring To The Connector - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules
2.4

Wiring to the Connector


Insulated Terminals Dimensions

A tip for connecting or removing the wire to the connector:
1. Use the blade of the flat-head screwdriver to
push down the wire clamp.
2. While holding the screwdriver in place,
insert or remove the wire into the terminal
block.
Remove the wire
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
:
(Unit: mm)
Insert the wire
Continue holding the
screwdriver in place
-18 -