ET-2200 Series Ethernet I/O Modules
4.4.2
DI/DO Configuration
The table describes the parameters contained in the "DI/DO Configuration" section.
Item
Digital Output
Host/Slave Watchdog
Timeout
Enable Safe Value
(Enable Watchdog)
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
This parameter is used to configure the Host Watchdog timeout value. If there is
no Modbus TCP communication activity for the specified period (the timeout),
then the Host Watchdog will activate an alarm.
This parameter is used to enable the watchdog on each DO channel.
Description
-45 -