Snmp Problem Solving - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.17.5 SNMP Problem Solving

Unable to receive the Trap message from the device
1. Check the setting of the Windows firewall or the Anti-virus software. These functions can be
disabled during the testing.
2. Check the setting of the Trap port. Using iReasoning MIB Browser as an example,
Click the Trap Receiver Settings button on the Trap Receiver page to open the window. Then,
confirm the Trap Port, Bind IP, and Transport settings. The ET-2200 uses the default Trap port
162 according to the SNMP specification.
3. Disable Windows SNMP Trap Service.
Note:
The configuration screen may be different depending on the Windows version. The following
screens are on Windows 10.
Step 1 Open the Control Panel window and click Administrative Tools.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Trap Receiver Settings
-112 -