Web Configuration; Logging Into The Web Server - ICPDAS ET-2268 CR User Manual

Ethernet i/o modules

Table of Contents

ET-2200 Series Ethernet I/O Modules

4. Web Configuration

The Ethernet I/O module has a built-in Web Server to provide an intuitive web management

interface, allowing users to modify the module's settings by using a web browser.

4.1

After completing the network settings, users can access the module's built-in web server from any

computer that's connected to the same network. Follow these steps:

Open a standard web browser. For example, Mozilla Firefox, Google Chrome,

Internet Explorer, and so on.

Note that if you intend to use Internet Explorer, ensure that the cache

function is disabled to avoid browser access errors.

Ensure that you have correctly configured the network settings for the I/O module, or refer to

Section 3.3 "Configuring the Network

Note1:

The function tab will be different depending on the I/O type of the module.

Note2:

The "Sync" and "PWM" functions are only suitable for the DIO module.

Note3:

The "SNMP" function is unavailable for ET-2217CI /2217CI-4 (AI) and ET-2224CI/2228CI (AO)

modules.

Settings".

-30 -

Table of Contents