Snmp Specific Trap - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.17.2 SNMP Specific Trap

The table describes the parameters contained in the " Digital Input/ Digital Output " section.
Item
Digital Input
All DI channels share a single Trap. Check the box to send a Trap message when
All
any DI status changes. "Specific ID" is the ID number set for this Trap
Each DI channel has a specific Trap. Check the box to enable the Trap function for
DI 7-0
that DI channel. "Specific ID" is the ID number set for individual channel
Digital Output
All DO channels share a single Trap. Check the box to send a Trap message when
All
any DO status changes. "Specific ID" is the ID number set for this Trap.
Each DO channel has a specific Trap. Check the box to enable the Trap function
DO 7-0
for that DO channel. "Specific ID" is the ID number set for individual channel
Update
After changing and saving the settings, also reboot the module to take effect
Setting
Reboot Click the button to reboot the module
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Description
-103 -