Connectivity Settings - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.12.1 Connectivity Settings

The table describes the parameters contained in the "Connectivity Settings" section.
Item
MQTT
Enables or Disables the MQTT connection function.
Broker
The IP address or the Hostname for the MQTT broker.
Broker Port
The port number for the MQTT broker.
The client identifier uniquely identifies the MQTT client to the
MQTT broker, and consists of the "module name"+ "_"
Client Identifier
(underscore character) + "the last 6 digits of the MAC address"
and cannot be changed.
This parameter is used when the MQTT broker requires
User Name
authentication. The length should be no more than 63 characters.
This parameter is used when the MQTT broker requires
Password
authentication. The length should be no more than 63 characters.
The time interval between attempts by the ET-2200 module to
Reconnection
connect to the broker if a connection failure occurs. The valid range
Interval
is 5 to 65000 seconds
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Description
Defaults
Disabled
N/A
1883
N/A
N/A
10(s)
-68 -