ICPDAS ET-2268 CR User Manual page 115

ET-2200 Series Ethernet I/O Modules
 Step 2: Configure the Ethernet Settings
Contact your network administrator to get the correct network configuration information (e.g.,
IP/Mask/Gateway) needed to set up I/O modules. For more instructions, refer to
"Configuring the Network
 Step 3: Log into the ET-2200 Web Server
1. Choose the ET-2200 module within the eSearch Utility and then click the "Web" button to open
the login webpage.
2. Enter the password in the Login password field (Defaults: "Admin") and click the "Submit"
button to log into the Web Server.
1
.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Settings".
2
.
3
.
Section 3.3
-115 -