ICPDAS ET-2268 CR User Manual page 42

ET-2200 Series Ethernet I/O Modules
 Reboot the module
The Reboot the module function can be used to remotely force the ET-2200 module to reboot. After
that, enter the password to log into the main page.
 Firmware Update
When updating the firmware, the module requires initialization on the LAN. In the case of earlier
firmware updates, users had to manually set the operating switch to "Init" and reboot the module
to complete the initialization. However, with the new firmware update, users can now initiate the
initialization process by clicking the "Update" button on the module's web interface.
Visit the website to download the latest firmware of the ET-2200 module. Also, refer to the "ET-2200
Firmware Update Manual" for instructions.
https://www.icpdas.com/en/download/show.php?num=2632
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -42 -