Snmp - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.17 SNMP

The "SNMP" page provides the function for ET-2200 to send module information and I/O
information to the SNMP Network Management Software or device to help administrators to
monitor the status of the ET-2200 in real time.
If the Trap function is enabled, ET-2200 can actively send messages to the SNMP manager to keep
track of data when the I/O status of the module changes or restarts. The detailed description is as
follows.
Note:
For DI/DO modules:
SNMP function is available for Firmware v2.3.4 and later. It is not supported for older versions.
For AI/AO modules:
SNMP function is available for Firmware v1.60 and later. It is not supported for older versions.
Note:
ET-2200 currently supports these MIB-II management items such as sysContact, sysLocation,
sysDescr, and sysName.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -101 -