How To Update The Firmware Via Ethernet - ICPDAS ET-2268 CR User Manual

Ethernet i/o modules

Table of Contents

ET-2200 Series Ethernet I/O Modules

A.2

How to update the firmware via Ethernet?

If the module is not functioning correctly (e.g. there is no response to a search request, or if the

system LED is continuously displayed as either OFF or ON), download new firmware from the ICPDAS

website.

http://www.icpdas.com/en/download/show.php?num=2626

To update the Firmware for your ET-2200 module, connect the ET-2200 module and PC in the same

sub-network. Please note that there should be only one network card on the PC. Then, download

and install the eSearch Utility:

http://www.icpdas.com/en/product/guide+Software+Utility_Driver+eSearch__Utility

Step 1: Run the eSearch utility and click on the Search Server button to find the ET-2200 module.

Step 2: Right-click on the module name and select Firmware Update.





Step 3: Select the firmware file and click on the Open button.

-173 -

Table of Contents