1. Manuals
  2. Brands
  3. ICPDAS Manuals
  4. I/O Systems
  5. ET-7000
  6. User manual

ICPDAS ET-7000 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.bitsandbytesmalta.com
Industri al Computer Products
Data Acquisi tion Syste ms
ET-7X00/PET-7X00 Series
User Manual
ET-7000/ET-7200 Series
(Ethernet I/O)
PET-7000/PET-7200 Series
(PoE I/O)

Advertisement

Table of Contents
loading

Related Manuals for ICPDAS ET-7000

Summary of Contents for ICPDAS ET-7000

  • Page 1 Industri al Computer Products Data Acquisi tion Syste ms ET-7X00/PET-7X00 Series User Manual ET-7000/ET-7200 Series (Ethernet I/O) PET-7000/PET-7200 Series (PoE I/O)
  • Page 2 Contact US If you have any problems, please feel free to contact us. You can count on us for a quick response. Email: service@icpdas.com ET-7X00/PET-7X00 User Manual, version 1.1.2 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 3: Table Of Contents

    3.3.2. Accessible IP Settings ................61 3.4. Web HMI ......................65 3.4.1. Web HMI ....................66 3.4.2. Web Edit ....................67 3.5. I/O Pair Connection ..................76 ET-7X00/PET-7X00 User Manual, version 1.1.2 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 4 5.2. Thermocouple Calibration ................114 5.3. RTD Calibration ....................115 5.4. Recover Calibration to Factory Setting ............117 MiniOS7 Utility Tools ................118 ET-7X00/PET-7X00 User Manual, version 1.1.2 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 5 Appendix E. Analog Output Type and Data Format Table ......156 Appendix F. Network Address Translation ..........157 Appendix G. Troubleshooting ..............159 Appendix H. Revision History ..............160 ET-7X00/PET-7X00 User Manual, version 1.1.2 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 6: Introduction

    Ethernet cable. This feature makes installation of PET-7X00 a piece of cake. Imagine that no more unnecessary wires, only an Ethernet cable takes care of everything in the field. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 1 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 7 The PET-7X00 is also equipped with an LED to indicate whether or not the power is being supplied via a PoE Switch. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 2 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 8: Features

    LAN Bypass feature guarantees the Ethernet communication. It will automatically active to continue the network traffic when the ET-7200/PET-7200 looses its power. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 3 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 9 Highly Reliable Under Harsh Environment Wide Operating Temperature Range: -25 ~ +75°C Storage Temperature: -30 ~ +80°C Humidity 10 ~ 90% RH (Non-condensing) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 4 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 10 IP address to access the Ethernet I/O module. Two pair of power input pins For ET-7000/PET-7000 series, there are only two pins for power input. To ease the wiring, the pins are increased to four pins as two pairs for ET-7200/PET-7200 series.

  • Page 11: Overview

    A link has been established on the E2 port. No link is established on the E2 port. Flashing Data transmission or receiving activity is occurring on the E2 port. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 6 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 12 ▪ Web HMI ▪ Pair Connection For more information about these settings, please refer to section 3.2.2. (C) "Resetting All Settings to Default”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 7 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 13 Init position when updating the ET-7X00/PET-7X00 firmware or the OS. Once the update has been completed, ensure that the switch is returned to the Normal position. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 8 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 14 When mounted to a DIN-Rail, connect the DIN-Rail to the earth ground because the DIN-Rail is in contact with the upper frame ground, as shown as “2” in the figure below. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 9 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 15: Dimensions

    All dimensions are in millimeters. For the ET-7000, PET-7000: 72 x 123 x 35 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 10 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 16 For the ET-7200, PET-7200: 76 x 120 x 42 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 11 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 17: Companion Cd

    ET7000_ET7200 Demo PC_client Modbus_TCP Document Application Data_sheet Firmware ET7000 PET7000 ET7200_PET7200 OS_image ET7000_PET7000 ET7200_PET7200 Software ez_data_logger minios7_utility modbus_labview modbus_master_tool modbus_tcp_client napopcsvr ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 12 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 18: Getting Started

    ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 13 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 19: Mounting The Et-7X00/Pet-7X00

    1. Hook the upper tab over the upper flange of the DIN-Rail. 2. Tilt the module toward the DIN-Rail until it snaps securely to rail. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 14 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 20 Piggyback Mounting The ET-7X00/PET-7X00 module has a hole on either side of the casing that can be used for piggyback mounting. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 15 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 21: Configuring The Boot Mode

    Use this mode for more tasks and configurations. Programs also are executed in this mode. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 16 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 22: Et-7X00/Pet-7X00 Hardware Connections

    Connect the positive of the power supply to the terminal marked “(R)+Vs” on the ET-7X00. Connect the negative of the power supply to the terminal marked “(B)GND” on the ET-7X00. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 17 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 23 Connect the power supply to the PoE Switch, which in turn supplies power to the PET-7X00. Tips & Warnings Only the E1 port of the PET-7X00 supports the PoE feature. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 18 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 24: Installing The Minios7 Utility

    Follow the instructions in the Setup Wizard to complete the installation After the installation has been completed, a new short cut for the MiniOS7 Utility will be displayed on your desktop. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 19 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 25: Using The Minios7 Utility To Assign An Ip Address

    IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 Step 1： Run the MiniOS7 Utility Double-click the “MiniOS7 Utility” shortcut on your desktop. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 20 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 26 “192.168.255.1” in the IP/Port field list, and then click the “IP Settings” icon in the toolbar to display the IP Settings dialog box. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 21 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 27 Address, Gateway and Alias, or you can use the DHCP function to dynamically assign IP addresses. Once the appropriate values have been entered, click the “Set” button to save the settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 22 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 28 MiniOS7 Utility to perform another search for the module to make sure that the IP settings are correct. See Step 2 for details. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 23 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 29: Enabling The Adobe Flash Player In Your Browser

    Google Toolbar will be included in the installation by default, so if you do not require this feature, be sure to uncheck this option. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 24 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 30: Configuring The I/O Functions

    If you haven’t changed the default IP address of the ET-7X00/PET-7X00 module, please refer to section 2.5. “Using the MiniOS7 Utility to Assign an IP Address” to configure it. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 25 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 31 Step 5： Welcome to the ET-7X00/PET-7X00 web interface After logging into the ET-7X00/PET-7X00 web interface, the welcome page will be displayed. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 26 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 32 For more detailed information related to the I/O specification, pin assignment, and I/O functions, etc. for each ET-7X00/PET-7X00, please refer to “ET7000_ET7200 Register Table”, which can be obtained from: CD:\NAPDOS\ET7000_ET7200\document\ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 27 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 33: Web Applications

    If you haven’t changed the default IP address of the ET-7X00/PET-7X00 module, please refer to section 2.5. “Using the MiniOS7 Utility to Assign an IP Address” to configure it. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 28 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 34 The factory default user name and password are as follows: Item Default User name Admin Password Admin ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 29 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 35 This web interface provides a number of functions, which can be easily accessed via the menu on the left hand side of the page. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 30 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 36: Overview

    The top section of the page provides some basic information about both the ET-7X00/PET-7X00 hardware and software. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 31 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 37 The lower section of the page provides a brief introduction to the web interface. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 32 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 38: Configuration

    Module I/O Settings: Provides access to the Common Functions page which allows you to configure the settings for the module I/O. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 33 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 39: Network Settings

    ● Manual configuration: In the absence of DHCP, ET-7X00/PET-7X00 modules can be manually configured with an IP address, mask, and a gateway. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 34 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 40 Enter the relevant network settings information into the respective fields . Step 3： Click the “Modify Settings” button to finish configuring the network settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 35 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 41 This page can be used to check the version information for the ET-7X00/PET-7X00 software after updating the ET-7X00/PET-7X00 firmware (see section 6.4 . “Uploading the ET-7X00/PET-7X00 firmware” for more details). ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 36 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 42: Basic Settings

    The “Basic Settings” page allows you to perform the following functions: (A) Configure the module information (B) Configure the web interface information (C) Reset all parameters to the default settings ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 37 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 43 Step 1： Enter the Module information in the relevant field. Step 2： Click the “Submit” button to finish configuring the module information. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 38 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 44 ET-7X00/PET-7X00. After completing the settings, click the “More Information” option to check that the link to the web site is correct (As per the figure below). ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 39 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 45 Step 1： Enter the desired information into the respective fields. Step 2： Click the “Submit” button to finish configuring the module information. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 40 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 46 Check the relevant check boxes for the items you wish to reset. Step 2： Click the “Submit” button to reset the settings to their factory default state. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 41 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 47 Page Header Information (Second line) http://www.icpdas.com More Information URL http://www.icpdas.com/root/product/soluti ons/remote_io/ethernet_io/et-7000_introdu ction.html Web Server Port Modbus TCP Port Modbus TCP Port (WAN) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 42 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 48 Output Slew Rate 0 (Immediate) Power-on Value Safe Value 2’s Comp Hexadecimal Data Format 2’s Comp Hexadecimal Engineering Unit ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 43 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 49 Data Format 2’s Comp Hexadecimal Engineering Unit Note: The analog input and the analog output share the same data format settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 44 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 50 A default user account consists of an account name, “Admin”, and a password, “Admin”. Accessible IP Settings Factory Default Settings Empty, there is no limit allowing any outgoing access. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 45 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 51 Web HMI Factory Default Settings Depends on the Modbus setting function of the ET-7X00/PET-7X00. Web Edit Factory Default Settings 0 Pages ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 46 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 52 (d) Factory Default Settings for the “I/O Pair Connection” Menu Option The table below outlines the factory default settings for the “Pair Connection” option. Pair Connection Factory Default Settings Empty ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 47 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 53: Module I/O Settings

    In this example, the ET-7026/PET-7026 will be used in order to explain the I/O settings. (The ET-7026/PET-7026 is a multi-function module that has 6 AI channels, 2 AO channels, 2 DI channels and 2 DO channels.) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 48 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 54 (A) Common Functions The Common Functions area provides options that allow the settings for the Modbus functions to be configured. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 49 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 55 This function can be enabled by configuring the Host WDT Timeout setting. For a more detailed description of these Modbus functions, please refer to: “Appendix C. Modbus Application Notes”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 50 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 56  Preset Value: This option allows the default values for the counters to be set. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 51 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 57 For more detailed technical specifications related to the jumper settings for each ET-7X00/PET-7X00 module, please refer to “ET7000_ET7200 Register Table”, which can be obtained from: CD:\NAPDOS\ET7000_ET7200\document\ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 52 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 58 This function can be enabled or disabled by configuring the Host WDT Timeout setting. For a more detailed description of these Modbus functions, please refer to: “Appendix C. Modbus Application Notes”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 53 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 59 For more detailed technical specifications related to the jumper settings for each ET-7X00/PET-7X00 module, please refer to “ET7000_ET7200 Register Table”, which can be obtained from: CD:\NAPDOS\ET7000_ET7200\document\ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 54 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 60 “Appendix D. Analog Input Type and Data Format Table”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 55 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 61 If an alarm occurs, the alarm status will be set to on. If the alarm is deactivated, the alarm status will be set to off. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 56 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 62: Authentication

    Accessible IP Settings: Provides access to the IP Filter Settings page, which allows you to control access to the web site. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 57 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 63: Account Management

    The Account Management page provides functions that allow the following tasks to be performed: (A) Configuration of user accounts (B) Restoration of the factory default user account ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 58 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 64 Enter the user account information into the relevant text fields, and then select the “Enable” checkbox. Step 2： Click the “Submit” button to complete the user account configuration and save the details. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 59 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 65 Step 1： Select the “Load Setup Default” checkbox. Step 2： Click the “Submit” button to restore the factory default user accounts. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 60 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 66: Accessible Ip Settings

    The IP Filter Settings page provides functions that allow the following tasks to be performed: ● Configuration of the connection filtering ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 61 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 67 By default, there is no restriction on outgoing access. Each filter list entry can be either activated or deactivated by selecting the respective “Activate the Rule” checkbox. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 62 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 68 Select the “Activate the Rule” checkbox. Step 4： Click the “Submit” button to complete the configuration of the IP filter list and save the settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 63 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 69 Select the “Activate the Rule” checkbox. Step 4： Click the “Submit” button to complete the configuration of the IP filter list and save the settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 64 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 70: Web Hmi

    ET-7X00/PET-7X00 module. Web Edit: Provides access to the Web interface Configuration page, which allows you to create dynamic web HMI pages. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 65 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 71: Web Hmi

    Then, the Web HMI is completed immediately without requiring any programming skills. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 66 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 72: Web Edit

    I/O point. No HTML or Java skills are required in order to create the web pages. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 67 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 73 The ET-7X00/PET-7X00 Web Edit function allows the creation of up to 10 user-defined web pages. A maximum of 10 pages can be created ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 68 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 74 Step 1： Add a New Page Click the “Add a new Page” button to begin creating a new page. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 69 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 75 “Image” dropdown list box, as shown below. Image information File name added to the Image dropdown list box ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 70 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 76 Enter a name for the page and select an image Click the “Edit” button to enter or modify the details of the register item(s) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 71 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 77 Step 6： Save the selected sensor settings Click the “Save” button to complete the setup and save the register settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 72 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 78 Click the “Edit” button to enter or modify the details of the register item(s) If you wish to delete a register item, click the “Clear” button. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 73 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 79 (Refer to Step 10) Step 9： Save the selected sensor settings Click the “Save” button to complete setup and save the register settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 74 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 80 Carriage web page, including control buttons that can be used to switch the motor for the conveyor on or off. Control buttons ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 75 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 81: I/O Pair Connection

    ET-7X00/PET-7X00 module can poll the status of remote input devices using the Modbus/TCP protocol and then continuously write to its output channels in the background. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 76 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 82 I/O Count: The I/O count mapped from the base address. Communication Timeout: The period of time that the ET-7X00/PET-7X00 module will wait for a response from the remote DI device. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 77 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 83: Example 1: Pair Connection - Ao To Ai

    ET-7017. Later, when the AI0/AI1 of the ET-7017 receives the 5 V, the AO0/AO1 of the PET-7026 will automatically output 5 V. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 78 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 84 The settings for both the AO type for the PET-7026 and the AI type for the ET-7017 must be the same. In this example, they are both “-5 V ~ 5 V”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 79 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 85 Remote AI Base Address: 0, (Starting from AI0 on the ET-7017) I/O Count 2, (Using AO0, AO1 and AI0, AI1) Communication Timeout 400 ms ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 80 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 86 After completing the configuration, click the “Submit” button to save the settings. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 81 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 87 Main Menu for the PET-7026, and then click the “AO” tab, where you will be able to check the AO0 value for the PET-7026. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 82 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 88: Example 2: Pair Connection - Do To Di

    PET-7044. Later, when the status of the DI0/DI1 is switched to ON, the status of the DO0/DO1 will be switched to logic high automatically. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 83 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 89 Remote DI Base Address: 0, (Starting from DI0 on the PET-7044) I/O Count 2, (Using DO0, DO1 and DI0, DI1) Communication Timeout 400 ms ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 84 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 90 “Web HMI” section of the Main Menu for the PET-7026, and click the “DO” tab, you will notice the status of the DO0 has changed to “ON”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 85 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 91: More Information

    The URL for this link can be changed by simply editing the URL. For more details, refer to section 3.2.2 “Configure the web interface information”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 86 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 92 The default URL that the More Information item will link to: http://www.icpdas.com/root/product/solutions/remote_io/ethernet_io/et-7000_introduct ion.html ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 87 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 93: Modbus And Modbus Tcp/Ip

    Modbus Organization to provide support and organization for the Modbus protocol. Only the use of the protocol is documented here. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 88 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 94: Modbus Tcp/Ip Interface

    ET-7X00/PET-7X00 module. UP to 12 connections are possible at one time. If there are 12 active connections, any attempt at any more connections is ignored. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 89 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 95: Protocol Description

    0 = Modbus protocol 2 bytes Number of following bytes - Includes the Unit Length Identifier Unit Identifier 1 byte Identification of remote slave ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 90 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 96 The data field may be nonexistent (of zero length) in certain kinds of requests; in this case the server does not require any additional information. The function code alone specifies the action. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 91 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 97 For an exception response, the server returns a code that is equivalent to the original function code from the request PDU with its most significant bit set to logic 1. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 92 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 98: Data Encoding

    04 read 16-bits items at a time; therefore, each of these data items will fit within one register that is read. Value 0x1234 0x12 0x34 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 93 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 99: Data Model

    The Modbus/TCP client needs to know what data is stored in which register locations to be able to retrieve it, process it, and/or display it. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 94 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 100: Modbus Functions And Registers

    DO0 is the LSB of this byte. The six remaining high order bits are zero filled. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 95 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 101: 0X02) Read Discrete Inputs

    DI0 is the LSB of this byte. The six remaining high order bits are zero filled. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 96 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 102: 0X03) Read Holding Registers

    The contents of AO0 are shown as the two byte values of 02 2B hex, or 555 decimal. The content of AO1 are 00 64, or 100 decimal. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 97 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 103: 0X04) Read Inputs Registers

    The contents of AI0 are shown as the two byte values of 00 0A hex, or 10 decimal. The content of AI1 are 00 64, or 100 decimal. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 98 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 104: 0X05) Write Single Coil

    Output Address Hi Output Address Lo Output Address Lo Output Value Hi Output Value Hi Output Value Lo Output Value Lo ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 99 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 105: 0X06) Write Single Register

    Register Address Hi Register Address Lo Register Address Lo Register Value Hi Register Value Hi Register Value Lo Register Value Lo ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 100 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 106: 0X0F) Write Multiple Coils

    Starting Address Lo Quantity of Outputs Hi Quantity Value Hi Quantity of Outputs Lo Quantity Value Lo Byte Count Outputs Value Lo ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 101 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 107: 0X10) Write Multiple Registers

    Quantity of Registers Lo Quantity Value Lo Byte Count Registers Value Hi Registers Value Lo Registers Value Hi Registers Value Lo ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 102 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 108: Modbus Master Simulators

    The following instructions will help you to read the status of digital inputs in an ET-7026 by using the Modbus/TCP Client application. Step 1: Double-click the “MBTCP.exe” to open it. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 103 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 109 Modbus/TCP Client contains the status of digital inputs of ET-7026. For a more detailed description of this function code, see the “Protocol Description” group box. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 104 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 110: Modbus Master Tool

    Step 1: Double-click the “ModbusMasterToolPC.exe” to open it. Step 2: Click the “Setup > Definition” in menu bar to setup the parameters. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 105 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 111 Please select “Hex” options in the “Format” drop-up menu when you read/write the AO/AI. Step 3: Click the “Connection > Connect” to set TCP Connection. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 106 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 112 You can keep the settings of other fields or change them then click OK. Now, the DO status of PET-7026 will show on the screen. (1: ON; 0: OFF) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 107 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 113: Modbus Demo Programs

    The relevant Modbus demo and SDK can be obtained from the following ICP DAS website. ● DLL and Documents: ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/nmodbus/ ● Demo: ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/nmodbus/demo/ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 108 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 114: Calibration

    Please go to the configuration page of Modules I/O Settings (refer to Section 0), set AI0 as ON and the others as OFF. (As figure below) ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 109 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 115 The complete version of the Modbus Master Tool can be obtained from the companion CD: CD:\NAPDOS\Software\Modbus_Master_Tool\ or from the ICP DAS FTP site at: ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/software/modbus_master_tool/ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 110 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 116 Note: When calibrating current type (i.e. type 06, 07 and 1A), the jumper of the corresponding channel should be short. Refer to the link for details. ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/data_she ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 111 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 117 In this example, we use type code - 09 and its “Zero Input” is 0 V. Type Code Input Range -5V ~ +5 V ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 112 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 118 Double-click on address 832 to set it as ON. If the calibration is successful, the value will return 0. Step 9： Disable calibration. As figure above, double-click on address 830 to set it as OFF. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 113 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 119: Thermocouple Calibration

    Step 8 Disable calibration. For example If you want to calibrate type 0E, you need to set the channel 0 as range - 01. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 114 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 120: Rtd Calibration

    The calibration procedure is similar to the section 5.1. However, the RTD calibration required an external resistor and must be calibrate for each channel rather than just the ch0 we mentioned before. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 115 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 121 (Refer to the table – Type Code) Step 7 Send the span calibration command. (Refer to the table - Modbus Address for Calibration) Step 8 Disable calibration. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 116 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 122: Recover Calibration To Factory Setting

    Please go to the configuration page of Modules I/O Settings – Analog Input (refer to Section 0). After you selecting the "Recover AI Calibration to Factory Setting", it will auto complete the function. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 117 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 123: Minios7 Utility Tools

    PC and the ET-7X00/PET-7X00 module. Step 1： Run the MiniOS7 Utility Double-click the “MiniOS7 Utility” shortcut on your desktop. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 118 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 124 ET-7X00/PET-7X00 module in the IP/Port field list and then click the “Connect” icon in the toolbar to connect to the ET-7X00/PET-7X00. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 119 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 125 A connection symbol Check the connection symbol status in the top right side to make sure the connection has been established Connection Status Disconnected Connected ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 120 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 126: Exchanging The Protocol (Tcp/Ip To Udp)

    Right click the file list of the right side windows, and then choose “Quit Firmware” to stop the firmware running and exchange TCP/IP protocol to UDP protocol. Right Click the file list ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 121 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 127 After confirming the command, the “Confirm” dialog will appear, and then click “Yes” button to exchange UDP protocol for TCP protocol. Step 5： The changes have been affected ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 122 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 128: Updating The Et-7X00/Pet-7X00 Os

    6.3. Updating the ET-7X00/PET-7X00 OS Additional features to ET-7X00/PET-7X00 OS will continue to be added in the future, so we advise you to periodically check with ICPDAS web site for the latest updates. Step 1： Download the latest version of the MiniOS7 OS image...
  • Page 129 Step 4： Choose “Update MiniOS7 Image” from the “File” menu Choose “Update MiniOS7 Image” from File menu to start the update procedure. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 124 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 130 After confirming the command, you just need to wait awhile until the following dialog appear, and then click “OK” button to finish the procedure. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 125 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 131 Press “F7” or choose “Info” from the “Command” menu to check the OS version After pressing “F7” or choosing info from “Command” menu to check the OS version. Check the Build item ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 126 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 132: Updating The Et-7X00/Pet-7X00 Firmware

    Step 1： Download the latest version of the firmware ET-7X00 ET7000_Vxx x.HEX The latest version of the ET-7000 firmware can be obtained from: CD:\NAPDOS\ET7000_ET7200\firmware\ET7000\ ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/firmware/et70 PET-7X00 PET7000_Vx xx.HEX The latest version of the PET-7000 firmware can be obtained from: CD:\NAPDOS\ET7000_ET7200\firmware\PET7000\ ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/firmware/pet7...
  • Page 133 Establish a connection to connection to the ET-7X00/PET-7X00 For a more detailed description of this instruction, please refer to section “6.1. Establishing a Connection”. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 128 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 134 (or right-click on the right of window) to erase the contents of the flash memory. Tips & Warnings You have to delete all files existed on the ET-7X00/PET-7X00 before uploading the firmware. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 129 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 135 Select the latest version of the firmware. Upload the last version of the firmware to the ET-7X00/PET-7X00 using drag-and-drop operation. Drag-and-Drop ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 130 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 136 “OK” button to finish the procedure. After the update is completed, set the switch (on the back of the module) to the "Normal" position. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 131 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 137: External Tools And Tasks

    The document containing the detailed instructions for linking to the ET-7X00/PET-7X00 using the Modbus protocol is located on the shipped CD:\NAPDOS\ET7000_ET7200\document\application\LabVIEW\ or ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/application/labvie ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 132 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 138: Opc Server

    However, if an OPC Server is provided for the device, other applications will be able to access the OPC Server via the OPC interface. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 133 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 139: Scada

    In the following sections 3 popular brands of SCADA software are introduced together with the detailed instructions in how use them to communicate with ET-7X00/PET-7X00 module using the Modbus/TCP protocol. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 134 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 140: Indusoft

    The document containing detailed instructions for linking to the ET-7X00/PET-7X00 module using the Modbus protocol is located on the shipped CD:\NAPDOS\ET7000_ET7200\document\application\InduSoft\ ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/application/indus oft/ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 135 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 141: Citect

    The document containing detailed instructions for linking to the ET-7X00/PET-7X00 module using the Modbus protocol is located on the shipped CD:\NAPDOS\ET7000_ET7200\document\application\Citect\ ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/application/citect/ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 136 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 142: Ifix

    The document containing detailed instructions for linking to the ET-7X00/PET-7X00 module using the Modbus protocol is located on the shipped CD:\NAPDOS\ET7000_ET7200\document\application\iFix\ ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/application/ifix/ ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 137 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 143: Appendix A. Node Information Area

    Appendix A. Node Information Area Each ET-7000/PET-7000 module has a built-in EEPROM to store configuration information such as IP address, type code, etc. One minor drawback is that there are no visual indications of the configuration of the module. New ET-7000/PET-7000 modules include node information areas that are protected by a cover, as shown below, and can be used to make a written record of the node information, such as IP address, etc.

  • Page 144: Appendix B. Thermocouple

    V2, which corresponds to T2. The thermocouple emf, V1, can be obtained by adding V2 to that measured by the voltmeter and then the temperature. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 139 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 145: Appendix C. Modbus Application Notes

    EEPROM. The WDT function will be disabled if the value is set to less than 5 seconds. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 140 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 146: Power-On Value

    Enable the Power-on Value by checking the “ON” radio button Step 3： Click the “Submit” button to complete the configuration of the power-on Value ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 141 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 147 Step 3： Click the “Submit” button to complete the configuration of the Power-on Value and save the settings to the EEPROM ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 142 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 148: Safe Value

    Enable the Safe Value by checking the “ON” radio button Step 3： Click the “Submit” button to complete the configuration of the power-on Value ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 143 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 149 Step 3： Click the “Submit” button to complete the configuration of the Safe Value and save the settings to the EEPROM ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 144 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 150: Ai High/Low Alarm

    0: Disable/1: Enable 00675 0: Disable/1: Enable 00644 0: Disable/1: Enable 00676 0: Disable/1: Enable 00645 0: Disable/1: Enable 00677 0: Disable/1: Enable ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 145 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 151 -32768 ~ 32767 40335 -32768 ~ 32767 40304 -32768 ~ 32767 40336 -32768 ~ 32767 40305 -32768 ~ 32767 40337 -32768 ~ 32767 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 146 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 152 00739 1: Latched 1: Latched 0:Momentary 0:Momentary 00708 00740 1: Latched 1: Latched 0:Momentary 0:Momentary 00709 00741 1: Latched 1: Latched ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 147 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 153 0. If a low alarm occurred, the value of register stays 1 until the address 00796 to 00827 is cleared. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 148 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 154 Set the High Alarm and Low Alarm information in the relevant field Step 3： Click the “Submit” button to complete the configuration of the High Alarm and the Low Alarm ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 149 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 155: Ai High/Low Latch

    “Web HMI” section of the Main Menu Step 2： Monitor the alarm status by viewing the “High/Low Latched Value for Analog Inputs” group table ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 150 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 156: Appendix D. Analog Input Type And Data Format Table

    -10 ~ +10 V 2’s comp HEX 7FFF 8000 Engineering Unit +5000 -5000 -5 ~ +5 V 2’s comp HEX 7FFF 8000 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 151 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 157 2’s comp HEX 7FFF 0000 0 ~ 1768°C Type S Engineering Unit +17680 Thermocouple 2’s comp HEX 7FFF 0000 0 ~ 1768°C ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 152 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 158 2’s comp HEX 7FFF 0000 0 ~ 200°C Platinum 100 Engineering Unit +6000 α=0.00385 2’s comp HEX 7FFF 0000 0 ~ 600°C ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 153 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 159 2’s comp HEX 7FFF 0000 0 ~ 200°C Cu 1000 Engineering Unit +15000 -2000 α=0.00421 2’s comp HEX 7FFF EEEF -20 ~ 150°C ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 154 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 160 -50 ~ 150°C 2’s comp HEX 7FFF D556 Engineering Unit +18000 -6000 Nickel 100 -60 ~ 180°C 2’s comp HEX 7FFF D556 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 155 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 161: Appendix E. Analog Output Type And Data Format Table

    0 ~ +5 V 2’s comp HEX 7FFF 0000 Engineering Unit +5000 -5000 -5 ~ +5 V 2’s comp HEX 7FFF 8000 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 156 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 162: Appendix F. Network Address Translation

    ET-7X00/PET-7X00 module, to have an unregistered (private) IP address and still be reachable over the Internet. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 157 Copyright © 2014 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...
  • Page 163 Internet For accessing the web page, the access URL will need to include the port number as shown below: http://210.32.166.58:180 ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 158 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 164: Appendix G. Troubleshooting

    Port 80 (Shown on the ET-7X00/PET-7X00 using the through Port 80 using a web Basic Settings page) specific TCP Port. browser. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 159 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

  • Page 165: Appendix H. Revision History

    Analog Output Settings and 3.2.3.(E) Analog Input Settings. 1.1.2 February 2014 Added product information for the ET-7200/PET-7200 in each section of the manual. ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 160 Copyright © 2013 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com...

This manual is also suitable for:

Et-7200Pet-7000Pet-7200

Table of Contents