Download Print this page
Hide thumbs Also See for ET-2261:

Advertisement

Quick Links

ET-2261/2261-16 Quick Start
What's in the box?
The package includes the following items:
ET-2261 Module x 1
Related Information
 ET-2200 Series Product Page:
 Documentation & Firmware:
 NS-205/MDR-20-24 Product Page (optional):
Technical support:
or
ET-2261-16 Module x 1
service@icpdas.com
v1.2, Jun. 2018
Quick Start x1
(This Document)
P1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ET-2261 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ICPDAS ET-2261

  • Page 1 ET-2261/2261-16 Quick Start v1.2, Jun. 2018 What’s in the box? The package includes the following items: ET-2261 Module x 1 Quick Start x1 ET-2261-16 Module x 1 (This Document) Related Information  ET-2200 Series Product Page:  Documentation & Firmware: ...
  • Page 2 “Search Servers” on Chapter 5 may not work. (Please contact with your system Administrator) Connect both the ET-2261/2261-16 and your PC to the same sub network or the same Ethernet switch. Supply power to the ET-2261/2261-16. Refer to the below for the valid range:...
  • Page 3 Pin Assignments & Wiring Note Technical support: service@icpdas.com...
  • Page 4: Wiring Note

    A tip for connecting the wire to the connector  A tip for removing the wire from the connector  Wire Connections: Readback as 1 Readback as 0 Power Relay ON State OFF State Load Load Relay Output AC/DC AC/DC COMx COMx Technical support: service@icpdas.com...
  • Page 5 Wiring the DO for Self-test 1) Use output LED to connect the External Power +24V to the NO0 pin. 2) Connect the External Power GND to the COM0 pin. ET-2261 Wiring ET-2261-16 Wiring Installing Software on Your PC Install eSearch Utility, whcich can be obtained frome the web site: http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/...
  • Page 6: Configuring Network Settings

    2) Click the name of ET-2261/2261-16 to select it. 3) Click the “Web” button to log in to the web configuration pages. (Or enter the URL address of the ET-2261/2261-16 in the address bar of the browser.) Technical support: service@icpdas.com...
  • Page 7 (default: Admin) in the “login password” field and Use the default password: Admin click “Submit”.  5) In the “Home” page, click the “DO0” button to ON (Red). 6) Verify that the output LED status for “high”.  High  Technical support: service@icpdas.com...
  • Page 8: Modbus Address

    “R”: Read, “W”: Write, “F”: Settings are recorded in flash by default, “E”: After writing DO[60] register, the data will be stored in flash. Note For detail “DI/DO Modbus Address” information, refer to Section 6.3 Modbus Register Table of user’s manual (http://ftp.icpdas.com/pub/cd/6000cd/napdos/et2200/document/). Technical support: service@icpdas.com...

This manual is also suitable for:

Et-2261-16