Analog Input Configuration - ICPDAS ET-2268 CR User Manual

Ethernet i/o modules

Table of Contents

ET-2200 Series Ethernet I/O Modules

4.4.3

Analog Input Configuration

Note:

The content in Sections

Note that some of the modules support the

The table describes the parameters contained in the "Analog Input Configuration" section.

Item

Analog Input Channel

AI0 ~ AI7

Analog Input

Data Format

Sampling Rates

Analog Input Mode

Update Settings

4.4.3 to 4.4.6

is available for some of the

alarm

function.

Set the data range for each channel and

disable it. If the alarm is enabled and the alarm mode is set to

"Momentary" which means the alarm status will

cleared if the alarm occurred and the AI value is back to normal. If

the mode is set to "Latch", the alarm status can only be cleared by

using the Clear command.

Set the data format, e.g., Hex or Engineering.

Set the sampling rate, e.g., 10 Hz or 200 Hz.

Set the wiring mode, e.g., Differential or Single End.

Click this button to save the changes.

modules.

Description

whether

to enable or

automatically

-48 -

Table of Contents