Snmp Agent Configuration - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.17.1 SNMP Agent Configuration

The table describes the parameters contained in the "System Info " section.
Item
Contact
Location
Description
Name
The table describes the parameters contained in the "Function" section.
Item
Read-Only Community
Read-Write
Community
Trap Community
Manager / Trap IP #1
Manager / Trap IP #2
Generic Trap
Enable SNMP
Update Settings
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
The SNMP server's contact person
The server's location
The description of the device displayed on the Server
The name of the device displayed on the Server
Set the community name of the module for read-only data
Set the community name of the module for read-write data
Set the community name of the module for the trap
Set the IP address of Trap IP #1
Set the IP address of Trap IP #2
Select to enable the Cold Start or Warm Start function
Select the box to enable the SNMP communication function
and deselect to disable it
After saving the settings, also reboot the module to take effect
Description
Description
Default
Value
User
Site
EtherIO
Device
Default
Value
public
private
public
0.0.0.0
0.0.0.0
Disabled
Disabled
-102 -