ICPDAS ET-2268 CR User Manual page 39

ET-2200 Series Ethernet I/O Modules
Dynamic Configuration
If your network is connected to a DHCP server, you can simply configure a dynamic IP address as
follows.
Step 1: Select "DHCP" from the Address Type drop-down menu.
Step 2: Click the "Update Settings" button to complete the configuration.
Manual Configuration
Follow the steps below to manually configure the IP address.
Step 1: Select "Static IP" from the Address Type drop-down menu.
Step 2: Enter the network settings of the module.
(The user can modify the network settings in Section 3.3)
Step 3: Click the "Update Settings" button to complete the configuration.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -39 -