Ai - Calibration - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

4.4.4 AI - Calibration

The following table provides parameter notes for the Calibration section:
Item
Calibration
Now Mode
Change Mode
Channel
Item
Set Calibration
Step1: In the Analog Input Configuration section of the I/O Settings page, enable the AI channel
and select the Type and Modbus Format, then click the Update Settings button to save the
changes.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Used to display the current mode
Click the Calibration Mode (or Run Mode) button to change the mode
Choose the AI channel for calibration
Choose to use either zero calibration or span calibration
Click the Calibration Apply button to perform calibration
Description
-49 -