ICPDAS ET-2268 CR User Manual page 38

ET-2200 Series Ethernet I/O Modules
DNS Settings
Auto DNS Configuration
Preferred DNS Server IP
Alternate DNS Server IP
Modbus TCP Slave
Local Modbus TCP port
Local Modbus NetID
Update Settings
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Enable:
The IP address of the DNS Server is automatically set by IPv4 DHCP.
Disable:
Automatically set to the preferred IP address of the DNS Server.
This parameter is used to set the preferred IP address of the DNS Server.
This parameter is used to set the alternate IP address of the DNS Server.
This parameter is used to set the local port to be used by the Modbus
slave device. The default value is 502.
This parameter is used to set the Network ID to be used by the Modbus
slave device. The default value is 1.
Click this button to save the changes.
-38 -