Features - ICPDAS ET-2268 CR User Manual

Ethernet i/o modules

Table of Contents

ET-2200 Series Ethernet I/O Modules

1.2

Features

 Built-in Web Server

The ET-2200 series module has a built-in web server

that allows users to easily configure, monitor, and

control the module from a remote location using a

web browser.

 Modbus TCP/UDP, MQTT, or SNMP Protocols

The Modbus TCP and Modbus UDP slave functions on

the Ethernet port can be used to provide data to remote SCADA software. All DI/DO modules

and some AI/AO modules support MQTT and SNMP V2c protocols.

 I/O Pair Connection (Push and Pull)

This function is used to create a DI to DO pair through

the Ethernet. Once the configuration is completed, the

ET-2200 module can continuously pull the status of the

remote DI device using the Modbus TCP protocol and

then write to local DO channels in the background.

 Slim-Type Housing

The ET-2200 modules are slim-type housing with about 3.3 cm in width. Compared with the palm-

size module that has about 7 cm in width, more slim-type ET-2200 modules can be installed on the

same DIN-Rail space.

3.3 cm

7 cm

-7 -

Table of Contents